Description
3.5” SBC with on-board Intel® Celeron® Dual-core 1007U 1.5GHz
Processor, DDR3, VGA/LVDS, Dual GbE, USB 2.0, mSATA, SATA 3Gb/s and
Audio
Features
1. 3.5” SBC with on-board 32nm 1.5GHz Intel® Celeron® 1007U dual-core mobile processor
2. VGA and LVDS support dual display
3. One 204-pin 1333/1600MHz DDR3 SO-DIMM supports up to 8GB memory
4. Easy fanless thermal design by assembling heat spreader on system chassis
5. Supports four COM, six USB 2.0, two SATA 3Gb/s, one mSATA and audio
6. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
2. VGA and LVDS support dual display
3. One 204-pin 1333/1600MHz DDR3 SO-DIMM supports up to 8GB memory
4. Easy fanless thermal design by assembling heat spreader on system chassis
5. Supports four COM, six USB 2.0, two SATA 3Gb/s, one mSATA and audio
6. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Specifications
CPU | On-board 32nm 1.5GHz Intel® Celeron® 1007U dual-core mobile processor |
PCH | Intel® NM70 |
BIOS | UEFI BIOS |
System Memory | One 204-pins 1333/1600 DDR3 SO-DIMM supported (system max. 8GB) |
Ethernet | Dual LAN: GbE Realtek RTL8111E controller with ASF 2.0 support |
I/O Interface | 1 x 6-pin wafer for PS/2 KB/MS 1 x RS-422/485 (by pin header) 3 x RS-232 (1 on rear, 2 by pin header) 2 x SATA 3Gb/s with SATA 5V power connector 2 x USB 2.0 (on rear) 4 x USB 2.0 (by pin header) |
Digital I/O | 8-bit digitial I/O (4-bit input/ 4-bit output) |
Super I/O | Fintek F81867 |
SMBus | 1 x 4-pin (1x4) wafer |
Audio | Realtek ALC662 HDA codec (Line-in, Line-out, Mic) |
Display Interfaces | Dual independent display support VGA integrated in NM70 (2048x1536@75MHz) Dual channel 24-bit LVDS integrated in NM70 (1920x1600@60MHz) |
Expansion | 1 x Full/Half-size PCIe Mini card slot with mSATA support |
Watchdog Timer | Software programmable support 1~255 sec. system reset |
Power Supply | 12V only, AT/ATX support |
Power Consumption | 12V@2.72A (Intel® mobile Celeron® 1007U 1.5GHz processor with 1333MHz 8GB DDR3 memory) |
Graphic | Intel® HD Graphics Gen 6 support for DX10.1 and OpenGL 3.0 Full MPEG2, VC1, AVC Decode |
Operating Temperature | -10°C ~ 60°C |
Storage Temperature | -20°C ~ 70°C |
Humidity | 5% ~ 95%, non-condensing |
Dimensions | 146 mm x 102 mm |
Weight | GW:600g / NW:250g |
Front Panel | 1 x 10-pin (1x10) header |
Fan Connector | 1 x 4-pin CPU fan connector 1 x 3-pin system fan connector (smart fan support) |
Ordering Information
Part No. | Description |
WAFER-NM701-1007U-R10 | 3.5" SBC with on-board Intel® Celeron® Dual-core 1007U 1.5GHz Processor, DDR3, VGA/LVDS, Dual GbE, USB 2.0, mSATA, SATA 3Gb/s and Audio |
32000-044300-RS | Dual port USB cable |
32205-003800-300-RS | RS-422/485 cable, 200mm |
32200-000049-RS | RS-232 cable, 200mm, pitch 2.0mm |
Packing List
1 * WAFER-NM701-1007U single board computer with heat spreader | 2 * Plastic shaft for securing half-size PCIe Mini card (P/N:43124-0010C2-01-RS) |
2 * SATA with power cable kit (P/N:32801-000201-300-RS) | 1 * Audio cable (P/N:32000-072100-RS) |
1 * Power cable (P/N:32100-087100-RS) | 1 * PS/2 KB/MS Y-cable (P/N:32000-023800-RS) |
1 * RS-232 cable (P/N:32200-000049-RS) | 1 * Mini jumper pack |
1 * One Key Recovery CD | 1 * QIG (Quick Installation Guide) |
1 * Utility CD |
0 komentar:
Posting Komentar