10.22
Unknown
ATX Motherboard Supports 22nm LGA1155 Intel® Xeon® E3/ Intel® Core™
i3 CPU with Intel® C216, DDR3, VGA, Dual Intel® PCIe GbE, USB 3.0, SATA
6Gb/s, HD Audio and RoHS
Features
1. LGA1155 Xeon® E3 and Intel® Core™ i3 processor supported
2. Dual-channel DDR3 1600/1333MHz supports up to 32GB
3. Intel® PCIe GbE with Intel® AMT 8.0 supported
4. Supports PCI-Express generation 3.0 at 8GT/s I/O bandwidth
5. USB 3.0 and SATA 6Gb/s supported
6. High speed interface usage for two PCIe x8/two PCIe x4 add-on cards
7. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
2. Dual-channel DDR3 1600/1333MHz supports up to 32GB
3. Intel® PCIe GbE with Intel® AMT 8.0 supported
4. Supports PCI-Express generation 3.0 at 8GT/s I/O bandwidth
5. USB 3.0 and SATA 6Gb/s supported
6. High speed interface usage for two PCIe x8/two PCIe x4 add-on cards
7. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Specifications
| CPU | LGA1155 socket supports Xeon® E3 and Intel® Core™ i3 quad/dual core processor |
| System Chipset | Intel® C216 |
| BIOS | UEFI BIOS |
| System Memory | Four 240-pin 1600/1333MHz dual-channel DDR3 SDRAM ECC and non-ECC unbuffered DIMMs supported (system max. 32GB) |
| Ethernet | LAN1: Intel® 82579 PHY with Intel® AMT 8.0 supported LAN2: Intel® 82574L PCIe controller |
| I/O Interface | 5 x RS-232 1 x RS-422/485 4 x USB 3.0 (rear I/O) 10 x USB 2.0 (4 on rear, 6 by pin header) 4 x SATA 3Gb/s 2 x SATA 6Gb/s (RAID 0/1/5/10 support) 1 x LPT 1 x PS/2 KB/MS 1 x 6-pin wafer for PS/2 KB/MS |
| Digital I/O | 8-bit Digital I/O (8-bit GPIO is for programming I/O) |
| Super I/O | Fintek F81866 |
| TPM | 1 x TPM connector (2x10 pin) |
| SMBus | 1 x 4-pin wafer |
| Audio | Realtek ALC662 HD audio codec (Line-in, Line-out, Mic) |
| Display Interfaces | VGA integrated in the Intel® C216 (up to 2048 x 1536 @75Hz) |
| Expansion | 2 x PCI slot 1 x PCIe x1 slot 2 x PCIe x4 slot 2 x PCIe x16 (share 1 PCIe x16 signal) |
| Watchdog Timer | Software programmable supports 1~255 sec. system reset |
| Power Supply | ATX power supply |
| Power Consumption | 3.3V@1.55A, 5V@3,43A, Vcore@3.12A, 12V@0.20A, 5VSB@0.18A (Intel® Xeon® 2.2GHz CPU with two 1333MHz 4GB DDR3 memory) |
| Graphic | Intel® HD Graphics 2000 / 3000 Supports DX10.1 and OpenGL 3.0 Full MPEG-2, VC1 and AVC Decode |
| Operating Temperature | -10°C ~ 60°C |
| Storage Temperature | -20°C ~ 70°C |
| Humidity | 5% ~ 95%, non-condensing |
| Dimensions | 244 mm x 305 mm |
| Weight | GW:1200g/NW: 700g |
| Front Panel | 1 x Front_Panel (Power LED, HDD LED, Speaker, Power Button, Reset Button) |
| I2C | 1 x 4-pin wafer |
| Front Audio | 2 x 5-pin header |
| Fan Connector | 1 x 4-pin CPU fan connector 2 x 3-pin system fan connector |
Ordering Information
| Part No. | Description |
| IMBA-C2160-R10 | ATX motherboard supports 22nm LGA1155 Intel® Xeon® E3/ Intel® Core™ i3 CPU with Intel® C216, DDR3, VGA, Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s, HD Audio and RoHS |
| 19800-003100-300-RS | Dual-port USB cable with bracket |
| 32006-000300-100-RS | Male PS/2 KB/MS Y-cable w/o bracket, 12cm(KB)+14cm(MS) |
| 32205-003800-300-RS | RS-422/485 cable, 200mm |
| 19800-000051-RS | RS-232 cable, 230mm |
| 32102-000100-200-RS | SATA power cable |
| 19800-000075-RS | PS/2 KB/MS Y-cable with bracket, 6-pin header, 220mm |
| CF-1156A-RS-R11 | High performance LGA1155/LGA1156 cooler kit, 1U chassis compatible, 73W |
| CF-1156E-R11 | High performance LGA1155/LGA1156 cooler kit, 95W |
| 19800-000049-RS | LPT cable |
| TPM-IN01-R11 | 20-pin Infineon TPM module, SW management tool, firmware V3.17 |
Packing List
| 1 * IMBA-C2160 single board computer | 4 * SATA Cable (P/N:32000-062800-RS) |
| 1 * Mini jumper pack | 1 * I/O shielding (P/N:45014-0034C0-00-RS) |
| 1 * Utility CD | 1 * One Key Recovery CD |
| 1 * QIG |
0 komentar:
Posting Komentar