ICE-DB-T6R

Description

Baseboard for COM Express Type 6 Module COM.0 Rev. 2.1 (for ICE-QM871 & ICE-BT-T6) 

Features

1. ATX form factor baseboard for COM.0 Rev. 2.1, pin-out Type 6
2. Support one PCIe x16, five PCIe x1, two PCIe Mini and one m-SATA
3. Support smart battery charger
4. Support PICMG EAPI R1.0 

Specifications

Standards	ATX form factor baseboard
CPU	Supports COM Express Compact / Basic module using connector pin out Type 6
I/O Interface	1 x PS2 KB/MS 1 x SD card socket 2 x RS-232 from SIO 2 x RS-232 from COM Express (only TX, RX, GND) 2 x USB 3.0 (standared USB 3.0 pin-header) 4 x SATA port
Digital I/O	Rear IO: 1 x Audio jack (Line-in, Line-out, Mic) 1 x DisplayPort connectors 1 x HDMI 1 x PS2 KB/MS 1 x RJ-45 connector 2 x USB 2.0 2 x USB 3.0
TPM	1 x TPM connector (2x10 pin)
SMBus	1 x 4-pin wafer
Audio	Realtek ALC662 HD Audio codec (Line-in, Line-out, Mic)
Display Interfaces	1 x VGA 1 x HDMI (HDMI signal only) 1 x DisplayPort pin-header 1 x DisplayPort connectors 1 x LVDS 18/24-bit single or dual channel (with PWM back light controller)
Expansion	1 x LPC 1 x PCIe x16 5 x PCIe x1 2 x PCIe Mini (MINIPCIE1 colay with m-sata with SATA_4)
Watchdog Timer	Software programmable supports 1~255 sec system reset
Power Supply	ATX / AT Power Supply 24+4 pins
GPIO	8-bit GPIO
Storage	EEPROM (supports EAPI R1.0)
Operating Temperature	-20°C ~ 60°C
Storage Temperature	-30°C ~ 70°C
Humidity	5% ~ 95 non-condensing
Dimensions	304.8 mm x 243.8 mm (12" x 9.6")
Front Panel	2 x 5-pin pin header
I2C	1 x 4-pin wafer
Fan Connector	1 x 4-pin / 1 x 3-pin CPU module fan connector 1 x 3-pin system fan connector by SIO

Ordering Information

Part No.	Description
ICE-DB-T6R-R10	Baseboard for COM Express Type 6 Module COM.0 Rev. 2.1, support PICMG EAPI R1.0
19800-003800-100-RS	RS-232/422/485 cable
32102-000100-200-RS	SATA Power cable

Packing List

1 * COM Express baseboard	1 * Dual-port RS-232 cable (P/N:19800-000051-RS)
2 * SATA cable (P/N:32000-062800-RS)	1 * Mini jumper pack
1 * QIG